| |
Battery Care - CTEK Details
(806-6v/800/3600/7000/14000-24v) |
|
| |
|
|
| |
Stock Name : |
CTEK 806 Conditioner |
|
| |
Pictures : |
|
|
| |
Bullet Points : |
Designed for 6 Volt Battery - Conditioner. |
|
| |
|
Free connector kit included for
difficult to reach batteries. |
|
| |
|
Fully automatic for continual use
when vehicle is not in use. |
|
| |
|
Charge voltage of 7.2 volts, 0.8
amps. |
|
| |
|
Waterproof case for vehicles kept
outside. |
|
| |
|
Suitable for all types of 6v
battery. |
|
| |
Description : |
Designed for use on 6 volt
batteries, Perfect for use on motorcycles, jet-skies or lawnmowers, the
operating procedure and charge voltage is the same as the 12 volt unit.
Charge current 0.8amps. Maximum 7.2 volts. Battery Charger CTEK,
XS800, XS3600. |
|
| |
Selling Info : |
| Stock Number |
Sell Price |
Unit |
|
|
| CT806 |
£39.95 |
Each |
|
|
| CT806CC |
£4.99 |
Additional connector kit |
|
|
| CT806CPA |
£6.99 |
Cigar plug adaptor |
|
|
|
|
| |
|
|
| |
Stock Name : |
CTEK 800 Conditioner |
|
| |
Pictures : |
|
|
| |
Bullet Points : |
Designed for 12 Volt Battery - Conditioner. |
|
| |
|
Free connector kit included for
difficult to reach batteries. |
|
| |
|
Monitors voltage and turns on & off
automatically. |
|
| |
|
Can be used without disconnecting
the car electrics. |
|
| |
|
Suitable for use on batteries from
1.2Ah to 100Ah. |
|
| |
|
Can charge negative & positive
earth vehicles. |
|
| |
Description : |
The CTEK800 battery conditioner uses the same PRIMARY SWITCHED electronics to make it the most advanced conditioner available today. The CTEK800 is designed for keeping good batteries in good condition. The conditioner constantly monitors the voltage after it has charged the battery to 14.4v and then only pulse’s the battery when the voltage drops due to alarms or natural drainage. This eliminates the danger of over charging the battery allowing it to be left connected for many months at a time. The XS800 will charge the battery to 95% at 0.8amps, it will then reduce its input current to 0.4 amps to slowly bring the battery to its maximum voltage before turning off and waiting for the battery to fall to 95% efficiency (approx 12.9v) when it will turn on again and condition the battery back to 100%. |
|
| |
Selling Info : |
| Stock Number |
Sell Price |
Unit |
|
|
| CT800 |
£39.95 |
Each |
|
|
| CT800CC |
£4.99 |
Additional connector kit |
|
|
| CT800CPA |
£6.99 |
Cigar plug adaptor |
|
|
|
|
| |
|
|
| |
Stock Name : |
CTEK 3600 Charger and Conditioner |
|
| |
Pictures : |
|
|
| |
Bullet Points : |
Designed for 12 Volt Battery - Charger and
Conditioner. |
|
| |
|
Free connector kit included for
difficult to reach batteries. |
|
| |
|
Monitors voltage and turns on & off
automatically. |
|
| |
|
Can be used without disconnecting
the car electrics. |
|
| |
|
Can charge negative & positive
earth vehicles. |
|
| |
|
Waterproof case for vehicles kept
outside. |
|
| |
Description : |
The Multi XS battery charger is the first PRIMARY SWITCHED charger of its kind. his allows it to charge at a higher rate without gassing or damaging vehicle electrics with spikes of power. The CTEK3600 has combined all the benefits of a trickle / float with the power of a conventional charger. The important factor is that the Multi XS constantly monitors the voltage after it has charged the battery, and then only pulse’s the battery when the voltage drops due to alarms or natural drainage. This eliminates the danger of over charging the battery.
The Multi XS has three charging modules, its ‘bulk’ mode will charge a flat battery up to 85% efficiency then switch to ‘absorption’ mode when it conditions the battery at a constant voltage to almost 100%, then switches to ‘pulse’ mode, at this point it is monitoring the voltage, if the voltage falls to 95% it will pulse the battery back to 100%.
Primary switched technology allows faster
safer charging without gassing.
Designed to be left connected for long periods.
Suitable for use on batteries from 1.2Ah to 120Ah.
Supplied with connection kit for difficult to
reach batteries.
Maximum charge voltage of 14.7v – 3.6amps.
|
|
| |
Selling Info : |
| Stock Number |
Sell Price |
Unit |
|
|
| CT3600 |
£49.95 |
Each |
|
|
| CT3600CC |
£4.95 |
Additional connector kit |
|
|
| CT3600CPA |
£6.95 |
Cigar plug adaptor |
|
|
|
|
| |
|
|
| |
Stock Name : |
CTEK 7000 Battery Charger |
|
| |
Pictures : |
|
|
| |
Bullet Points : |
Designed for 12 volt batteries of
14 - 225Ah. |
|
| |
|
Free connector kit included for
difficult to reach batteries. |
|
| |
|
Four step boost charger with
maintenance mode. |
|
| |
|
Maximum Charge current of 7 amps. |
|
| |
|
Can be used as a 13.6 volt power
supply for electronic diagnostics. |
|
| |
|
Suitable for Calcium batteries. |
|
| |
Description : |
This battery charger is the most
sophisticated available. The 16v boost setting is designed to recover deeply
discharged batteries. Two charging currents are then available dependant on
the size and type of battery. The supply 13.6v setting is a feature unique
to the XS7000, this turns the unit into a 13.6v power supply. This can be
used for diagnostics when a constant voltage is required or to be connected
to the vehicle electrics to avoid loosing security codes and vehicle ECU
settings. The CTEK 7000 is also suitable for the calcium style batteries
fitted to some new cars. |
|
| |
Selling Info : |
| Stock Number |
Sell Price |
Unit |
|
|
| CT7000 |
£89.95 |
Each |
|
|
| CT7000CC |
£4.99 |
Additional connector kit |
|
|
| CT7000CPA |
£6.99 |
Cigar plug adaptor |
|
|
|
|
| |
|
|
| |
Stock Name : |
CTEK 14000 Battery Charger |
|
| |
Pictures : |
|
|
| |
Bullet Points : |
Designed for 24 volt batteries. |
|
| |
|
Free connector kit included for
difficult to reach batteries. |
|
| |
|
Fully automatic for continual use
when vehicle is not in use. |
|
| |
|
Charge voltage of 12 volts, 14 amps
max. |
|
| |
|
Waterproof case for vehicles kept
outside. |
|
| |
|
Suitable for all types of battery
to maximum size 500ah. |
|
| |
Description : |
The CTEK 14000 24 Volt charger is
designed for commercial vehicles and boats.
Maximum charge current 14 amps. Eight step fully automatic charger with
maintenance mode. This charge can also be used as a power supply for
electronic diagnostics. |
|
| |
Selling Info : |
| Stock Number |
Sell Price |
Unit |
|
|
| CT14000 |
£195.95 |
Each |
|
|
|
|
| |
|
|
